The Bolt 1000 TX and RX pair can transmit 1080p60 video up to 1000' line-of-sight with less than 1 ms of latency when not converting video formats.
The hardened aluminum chassis is designed to withstand the rigors of production, and features 1/4"-20 threaded mounting holes.
The built-in USB port on the receiver enables direct connection to a computer, so you can capture video directly from the receiver into your computer over USB 3.0. With this video available, rough edits can be made even before the footage is offloaded from the camera.
A built-in OLED information screen is built into the receiver. This enables rapid setup and confirmation of your settings.
Utilizing the OLED screen, you can apply 3D LUTs with the press of a button. Upload your own LUTs using the free Bolt Manager software, or select from several built-in presets using Bolt's OSD.
You can select to transmit in 20 or 40 MHz channels. However, please note that while 20 MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions, they do not support audio transmission, as well as interlaced, PsF, and 1080p 60/50 frame rates. The 40 MHz channels support audio, interlaced, PsF, and 1080p 60/50.
All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.
You can select either dynamic or manual frequency.